AQUAFIN-1K is a waterproof cement-based polymer-modified coating. When combined with water, it creates a thick, stiff surface barrier
It is made up of Portland cement, high-quality quartz sand, and polymer-enhanced chemical additives. AQUAFIN-1K is both waterproof and vapor permeable (it allows the concrete to "breathe"). Prior to painting or coating, the material should be cleansed with a firm, dry brush. After 3 days, vapor permeable, alkali resistant paints can be applied if the AQUAFIN treatment is dry. After 3 days, tile mortars can be applied. It can be applied to moist concrete or substrate. It is non-flammable, no odor and non toxic.
- Aggregate State: Powder
- Color: Gray or White
- Bulk Density: 88 lb/ft3 (1.4 kg/L) dry; 116 lb/ft3 (1.85 kg/L) wet
- VOC: 0% (0 g/L)
- Drying Time~2 to 4 hours at 68�F (20�C)
- Compressive Strength: ASTM C109
- 4,000 psi (27.6 MPa) @ 28 days. Gray and White
- Flexural Strength: EN 196/1 ASTM C348 modified
- 300 psi (2.07 MPa) @ 28 days. Gray and White
- Shrinkage: ASTM C596
- 28 days: -0.014%
- Vapor Permeability: Permeance - ASTM E96
- Permeance: 8 perms (untreated control: 10 perms)
- Microbiological growth: DVGW-W270 Germany not supported
