Call us at 855.877.3630

TREMCO SPECTREM 4-TS 1.5GL

Be the first to review this product

Availability: In stock

$144.46
 

Details

Tremco Spectrem 4-TS is a multi-component, low-modulus, construction sealant with patented advanced silicone technology. Non-staining and low polar attraction to dirt increases aesthetic appearance. Spectrem 4-TS offers color flexibility with the opportunity to tint the material on site.

 

Tremco Spectrem 4-TS Color Packs

 

Basic Uses
Formulated for use in dynamically moving building joints with +/- 50% movement. Typical applications for Spectrem 4-TS include EIFS, expansion and control joints, tilt-up panel joints, precast concrete panel joints, and perimeter caulking (windows, doors, panels).

Features and Benefits

  • Tremco Universal Color Paks in 70 standard colors and no minimum purchase quantity afford color flexibility for seamless façade appearance.
  • Opportunity to tint materials on-site means quick turn-around.
  • A 20-yr non-stain warranty when pre-approved and tested by Tremco in accordance with ASTM C1248.
  • Low polar attraction to dirt makes buildings easier to clean and maintain.
  • Low-modulus and low Shore A hardness reduces chance of EIFS substrate failures when compared to applications with medium-modulus sealants.
  • Primerless adhesion to most construction materials.
  • Extended tooling time and workability in high temperatures.
  • Ease of use reduces risk of application failure.
  • No cure inhibition with Spectrem 1, Spectrem 2, Dymonic® FC when applied "wet-to-wet," minimizing the chance of leakage when sealants abut at glazing and other façade intersects.
  • Low-VOC and zero-solvent content satisfies the LEED Indoor Environmental Criteria.
  • Greenguard Gold certification ensures safety for use in the most sensitive indoor environments including hospitals and schools.

Limitations

  • Do not apply over damp or contaminated surfaces.
  • Not intended for continuous water immersion.
  • Use with adequate ventilation.

Substrate Preparation
For good adhesion, the joint interface must be sound, clean and dry. Depending on the substrate, or presence of form release agents, masonry
waterproofing, dust, loose mortar or laitance, architectural paints or finishes, the joint surface may require a thorough wire brushing, grinding, sandblasting, solvent washing and/or primer.

Applicable Standards

  • Conforms to ASTM C920, Type M, Grade NS, Class 50, Use NT, G, M, A and O
  • U.S. Federal Specification TT-S-00230, Type I, Class A
  • U.S. Federal Specification TT-S-001543A Class A
  • Canadian Standard CAN/CGSB-19.13-M87
  • EIMA Test Method 300.01
  • ASTM C 1382

Application
Mix in accordance with directions on the product container label. Mixing should continue until the desired uniform color is reached. Apply with conventional caulking equipment, filling the joint completely and tool.

Joint Design
May be used in any vertical or horizontal joint design in accordance with accepted architectural/engineering practice. Joint width should be 4-times anticipated movement, but not less than 1/4" (6 mm) wide.

Joint Backing
Closed-cell polyethylene backer rods are preferred as joint backing to control depth of sealant bead. Where depth of joint will prevent use of joint backing, an adhesive- backed polyethylene tape should be installed to prevent threesided adhesion. Joint backing must be dry at time of sealant application.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Write Your Own Review

You're reviewing: TREMCO SPECTREM 4-TS 1.5GL

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Rating
Joint Size D x W Inches1 Gallon10.3 Fluid Ounce Tube20 Fluid Ounce Sausage2 Gallon Pail4.5 Gallon Pail
3/16 x 1/4 411 33 64 821 1848
3/16 x 3/8 274 22 43 548 1232
3/16 x 1/2 205 16 32 411 924
3/16 x 5/8 164 13 26 329 739
3/16 x 3/4 137 11 21 274 616
           
1/4 x 1/4 308 25 48 616 1386
1/4 x 3/8 205 16 32 411 924
1/4 x 1/2 154 12 24 308 693
1/4 x 5/8 123 10 19 246 554
1/4 x 3/4 103 8.3 16 205 462
1/4 x 1 77 6.2 12 154 346
           
3/8 x 3/8 137 11 21 274 616
3/8 x 1/2 103 8.3 16 205 462
3/8 x 5/8 82 6.6 13 164 370
3/8 x 3/4 68 5.5 11 137 308
3/8 x 1 51 4.1 7.9 103 231
3/8 x 1.5 34 2.7 5.3 68 154
3/8 x 2 25 2 3.9 51 115
3/8 x 3 17 1.4 2.6 34 77
           
1/2 x 1/2 77 6.2 12 154 346
1/2 x 5/8 62 5 9.7 123 277
1/2 x 3/4 51 4.1 8 103 231
1/2 x 1 39 3.1 6.1 77 173
1/2 x 1.5 25 2 3.9 52 115
1/2 x 2 19 1.5 3 38 86
1/2 x 3 12 1 1.9 26 58

Volume Equivalents:

25 Tubes = one 2 Gallon Pail

56 Tubes = one 4.5 Gallon Pail

6 20-oz Sausages = 1 Gallon, Less 8-oz