Call us at 855.877.3630


Cementitious Protective Coating | Two-Component, Polymer-Modified, Waterproof, Cement-Based Coating System

2 component system (1A + 1B) | Freight Shipping Only


Be the first to review this product

Availability: In stock



Sikagard FlexCoat is a polymerized cementitious protective coating. It consists of a unique rubber-like polymer liquid (Part A) mixed at the time of application with a cement aggregate blend (Part B).


Product Data Sheet

Where to Use

  • Balcony deck surfacing.
  • Concrete exterior restoration.
  • Sidewalk resurfacing.
  • Wall refinishing and installation coating.
  • Stadium renovation.
  • Swimming pool walkways.


It can be applied over almost any clean, sound surface e.g. concrete, block, masonry, etc. for a number of different floor, wall and roof uses. Important characteristics of Sikagard FlexCoat are its extraordinary adhesion coupled with its ability to withstand prolonged pedestrian and light vehicular traffic. In these respects, the material is far superior to conventional cementitious coatings. Sikagard FlexCoat provides a waterproof coating which substantially reduces or prevents water penetration, freeze-thaw scaling and concrete carbonation. It is a “breathable” coating which releases normal entrapped vapor without loosening or blistering. Sikagard FlexCoat is available in natural cement color. Sikalastic Traffic Systems can be top coated with Sikagard® Flexcoat cement based systems. Please refer to the spec component of the Sikalastic/Sikagard Flexcoat Hybrid System.


  • 55 lb. bag. and 2.5 gallon liquid (packaged in 3.5 gallon pail) = 1 unit.


  • Sikagard FlexCoat is applied in two coats. Each coat should be applied at 250 ft.2/unit. A total of 60 mils total thickness is required. On-site results for coverage will vary.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Write Your Own Review

You're reviewing: SIKAGARD FLEXCOAT

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars