Sikacrete 211 is a one-component, cementitious, pumpable and pourable portland-cement concrete mix containing factory blended coarse aggregate.
Used for:
Full depth repairs.
On grade, above, and below grade on concrete.
On horizontal, vertical and overhead surfaces.
As a structural repair material for parking facilities, industrial plants, walkways, bridges, tunnels, dams and balconies.
Filler for voids and cavities.
- Pre-packaged coarse aggregate: Eliminates need to extend material in the field;
- Eliminates the risk of reactive aggregate.
- High bond strength.
- Compatible with coefficient of thermal expansion of concrete.
- Increased resistance to deicing salts.
- Simple-to-use labor-saving system.
- Easily mixed.
- Good freeze/thaw resistance.
- Easily applied to clean, sound substrate.
- Not a vapor barrier.
- Not flammable
- Coverage: Approximately 0.65 ft.3/unit
- Packaging: 80lb. multi-wall bag.
Application thickness: Minimum 1 in (25 mm); Maximum 8 in. (200 mm)
Minimum ambient and surface temperatures 45 degrees F (7 degrees C) and rising at time of application.
Using SikaLatex, SikaLatex R or similar products will result in loss of slump and slump retention. Field tests for suitability are strongly recommended.
Product Data Sheet
Sika Repair Mortars, Grouts & Concrete Application Guide
This product can expose you to chemicals including Quartz (SiO2), which are known to the State of California to cause Cancer & Reproductive Harm.
