Call us at 855.877.3630


Hazardous Material - Ground Shipping Only 

600ml Unit | Twin 20oz Cartridges | Comes with Mixing Nozzle

Be the first to review this product

Availability: In stock



Sika AnchorFix-3001 is a two component, pure epoxy anchoring adhesive


Sika AnchorFix 3001 Product Data Sheet


Sika AnchorFix-3001 is a two component, pure epoxy anchoring adhesive. Using high quality, VOC- and styrene-free technology, Sika AnchorFix 3001 has been specifically design to provide a high-strength, user-friendly and versatile adhesive for use in dry, wet or flooded conditions and on or into numerous base materials. The anchoring adhesive is suitable for medium and heavy loads in both structural and non-structural applications.

Where to Use

  • Anchoring of rebar or threaded rods in solid concrete, masonry, brick, block and stone.
  • Grouting horizontally, vertically and overhead (refer to Limitations), where slow-setting
    allows extended working time.
  • Suitable for deeper and scattered holes or applications where a fast-turnaround is not
  • Suitable for use as a ‘pick-proof’ sealant in secure or holding suites and similar
  • Grouting in external environments and where applications are subject to dynamic
    loads and vibrations.
  • Anchoring structural steel to concrete, safety barriers, balcony stanchions, canopies,
    signs, hand rails, racking, machinery, masonry supports, stadium seats, reinforcing
    and starter bars. 


  • Supplied as 1:1 ratio in side by side cartridges.
  • Styrene- and VOC- free
  • Versatile material allows application as adhesive and anchoring gel.
  • Sets up in dry, wet or flooded conditions.
  • Cures down to 0°C (32°F) when material is conditioned to 5°C (41°F).
  • Cures without exhibiting expansion pressures.
  • Extended open and gel times accommodate anchoring in deep and scattered holes.
  • Permits anchors close to free edges.
  • Suitable for chemical anchors, threaded bars and reinforcing steel.
  • Performs in both cracked and non-cracked concrete
  • Resistant to a wide range of chemicals, including aqueous solutions of aluminum
    chloride at saturation, aluminium nitrate at 10% concentration, jet fuel, diesel fuel,
    domestic kerosene and many other substances at 75°C (167°F) while retaining at
    least 80% of physical values.(See Chemical Resistance Guide).
  • Supports high loads

Sika AnchorFix 3001

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Write Your Own Review

You're reviewing: SIKA ANCHORFIX-3001 600ML

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars