Call us at 855.877.3630


Be the first to review this product

Availability: In stock

* Required Fields



High-Strength, Polyurethane Foam Spacer For Structural Glazing


The Thermalbond V2200 series is specially designed to provide the following features:

  • Open-cell structure allows air and moisture to reach the silicone for optimum curing of the silicone
  • Semi-rigid polyurethane foam is compatible with all silicone tested
  • Low thermal conductivity improves the performance of the wall and can support LEED points
  • Excellent resistance to temperature variations, fungi and oxidation

The Thermalbond V2200G272 configuration offers the same benefits as the standard configuration with addition of:

  • Gray foam core with UV stable gray pigmented adhesive coatings 

The Thermalbond Xpress (TBX2) configuration offers the same benefits as the standard configuration with addition of:

  • Standard Thermalbond grade adhesive on one side ensuring an aggressive bond to aluminum profiles
  • Low friction coating eliminates trapped air pockets and makes alignment of the glass simple and easy
  • Adhesive will unwind from the specially treated top side of the foam which eliminates the need to have a seperate liner to remove and recycle

Important Instructions

  • Refer to silicone manufacturer to confirm compatability information. Due to the numerous variables involved in a structural glazing system, each project should be individually lab tested by the silicone manufacturer for compatability between Thermalbond®, the structural silicone and all other adjacent components. • Surfaces must be clean and free of oil, grease, moisture, dust and dirt. Isopropyl alcohol is good for cleaning the surface.
  • Apply a uniform pressure of 15 psi (103 kPa) to promote good contact between the material to be bonded and the tape. The application temperature should be between 60°F and 125°F (16°C to 52°C). It is not recommended to apply these tapes at temperatures below 60°F (16°C), as the adhesive does not flow in this condition and can result in poor bonding.
  • Recommended service temperature is between -40°F to 180°F (-40°C to 82°C).

Shelf Life

  • 12 months after the date of sale when stored in original packaging at temperatures up to 70°F (21°C) and 50% relative humidity

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Write Your Own Review


How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars