Call us at 855.877.3630


MODEL 1935990

Be the first to review this product

Availability: Out of stock



Loctite 2 in 1 Seal & Bond Tub & Tile is formulated for sealing projects in kitchens & bathrooms. The Seal & Bond technology provides increased durability for a long lasting, mold and mildew resistant seal. Loctite 2 in 1 Seal & Bond Tub & Tile resists color change and abrasion to harsh chemical cleaners. This easy to use acrylic based sealant remains flexible and watertight to provide durability and longevity. It is paintable and can be easily cleaned with soap and water.

Recommended For

  • Sealing around bathtubs, sinks, shower stalls, tiles and backsplashes.
  • Excellent adhesion to ceramic, porcelain, glass, fiberglass composites, enamel, aluminum, stainless steel, wood, many plastics and wallboard.

Not Recommended For

  • Not for use in architectural joints, joints subject to heavy abrasion or wear or tuck pointing
  • Do not apply at temperatures below 40°F (5°C) and above 100°F (38°C)
  • If joint size should exceed ¼'' x ¼'' use backing material
  • Not recommended for continuous water immersion
  • Do not apply outdoors when rain or freezing temperatures are expected within 24 hours
  • Not for bonding two non-porous surfaces
  • Do not use under shower door tracks, below water line, on mirrors or in aquariums




Adhesive and Caulk in one


Product can be used for bonding and sealing applications

Contains mildewcide


Cured caulk will resist mold and mildew growth

Easy clean up


Uncured adhesive cleans up easily with soap and water

Permanently flexible and durable


Long lasting, professional finish



Ideal for humid or steamy areas

Water-based adhesive


Low odor and non-flammable

Available in 10 or 5.5 fl. oz. sizes


Two convenient sizes for different size projects


Safety Precautions

Apply and cure in a well-ventilated area. Wear gloves and wash hands after use.


Apply sealant between 40°F (5°C) and 100°F (38°C). Surfaces must be clean, dry and free of old caulk, grease, dust and other contaminants. Remove mold or mildew using bleach and detergent that does not contain ammonia. Rinse surface and allow to dry. For neat bead lines, mask both sides of the joint. Cut the tip off the cartridge or squeeze tube at a 45° angle to desired bead size (minimum of 3 mm or 1/8').


Using a caulking gun, apply sealant with steady pressure, forcing the sealant into the joint. Smooth bead immediately with a wet finger or a tool. Remove masking tape immediately after tooling and wipe excess off of hands and tools. Sealant is paintable with a latex or oil-based paint after 2 hours. Wait 24 to 48 hours before exposing to water.
Note: Clear sealant will extrude white and then turn to clear as it cures.


Clean tools and uncured product residue immediately with warm, soapy water. Cured sealant may be carefully cut away with a sharp-edged tool.

Additional Documents

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Write Your Own Review

You're reviewing: LOCTITE 2 IN 1 SEAL & BOND TUB & TILE 5.5OZ

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars