Call us at 855.877.3630

LOCTITE 2 IN 1 SEAL & BOND ALL PURPOSE ADHESIVE CAULK 5.5OZ

FLEXIBLE & DURABLE ADHESIVE CAULK


PART #1937108

Be the first to review this product

Availability: In stock

$3.78
 

Details

Loctite 2 in 1 Seal & Bond All Purpose is formulated for sealing projects in and around the house. The Seal & Bond technology provides increased durability for a long lasting, flexible seal. Loctite 2 in 1 All Purpose is easy to apply and tool and the cured product is weather-resistant, mold and mildew resistant and paintable in 40 minutes.

Recommended For

  • Loctite 2 in 1 All-Purpose was designed to be a multiple use adhesive and caulk. It can be used for almost any household or remodelling project.
  • It can even help to lower energy costs by sealing air leaks around windows and door sand other utility and plumbing penetrations.
  • Use for gluing loose molding or tiles, securing backsplashes, setting sinks and even repairing or concealing small cracks in plaster, drywall or around molding and baseboards.
  • Bonds to almost any surface including wood, concrete, metal, ceramic, drywall, plaster, tiles and much more.

Not Recommended For

  • Not recommended for continuous water immersion
  • If joint size exceeds ¼'' x ¼'' use backing material
  • Not for use on Butt joints
  • Do not apply at temperatures below 40°F (5°C) and above 100°F (38°C)
  • Do not apply outdoors if rain or freezing temperatures are expected within 24 hours of application
  • Do not use on unfinished or unprimed fiber cement (Fiber cement must be primed or have a factory finish before application)
  • Not for use in architectural joints, joints subject to heavy abrasion or wear or tuck pointing
  • Not for use below water line, on mirrors or in aquariums, under shower door tracks or between two non-porous surfaces

Feature

 

Benefit

2-in-1 product

 

Possesses both bonding and sealing capabilities

Permanently flexible and durable

 

Long lasting, professional finish

Mold & mildew resistant

 

Inhibits mold & mildew growth

Easy clean up

 

Uncured adhesive cleans up easily with soap and water

Water-resistant

 

Ideal for humid or steamy areas

Paintable and durable

 

Long lasting, professional finish

Water-based adhesive

 

Low odor, non-flammable

Safety Precautions

Apply and cure in a well-ventilated area. Wear gloves and wash hands after use.

Preparation

Apply sealant between 40°F (5°C) and 100°F (38°C). Surfaces must be clean, dry and free of old caulk, grease, dust and other contaminants. Remove mold or mildew using bleach and detergent that does not contain ammonia. Rinse surface and allow to dry. For neat bead lines, mask both sides of the joint. Cut the tip off the cartridge or squeeze tube at a 45° angle to desired bead size (minimum of 3 mm or 1/8').

Application

Apply sealant with steady pressure, forcing the sealant into the joint. Smooth bead immediately with a wet finger or a tool. Remove masking tape immediately after tooling and wipe excess off of hands and tools. Sealant is paintable within 40 minutes depending on temperature and humidity. Allow at least 24 hours before exposing to water. Periodically clean cured sealant with non-abrasive cleaner for best appearance. 
Note: The clear product will extrude white and will turn clear as it dries.

Cleanup

Clean tools and uncured product residue immediately with warm, soapy water. Cured sealant may be carefully cut away with a sharp-edged tool.

 

Additional Documents 


Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Write Your Own Review

You're reviewing: LOCTITE 2 IN 1 SEAL & BOND ALL PURPOSE ADHESIVE CAULK 5.5OZ

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Rating