Henry 787 Elastomeric Fluid Applied Water damage restoration Coating is a cold-applied, asphalt emollient that heals and provides an industrial strength smooth user experience, and rubber-like outer layer to be used in water resistance or humid protecting concrete and masonry surface areas above and below grade.
It is suitable for use on cementitious blocks and concrete foundations as a high-quality waterproof membrane or damp protecting covering. The resulting elastomeric membrane has a higher filler material while preserving a considerable degree of strength and durability. Using Henry 787 Elastomeric Fluid The water-resistant membrane can be decided to apply with a shovel, a brush, or a squirt.
HE787 - ELASTOMULSION� WATERPROOFING is designed for use as a waterproofing or dampproofing membrane for use on concrete or masonry structures, both above and below grade. Because of its elastomeric quality, HE787 - ELASTOMULSION� WATERPROOFING is ideally suited to be used as a premium waterproofing or dampproofing coating on concrete block (CMU) foundation walls.
- Black pastelike liquid appearance
- 10 g/l maximum VOC
- >70% solids by weight
- Soft paste consistency @ 77_ F
- 0.08 lb/gal maximum VOS
- 0.99 specific gravity @ 77_ F (25_C)
- 1250% (ASTM D 412) elongation (initial)
- 17.6 lbs/in (ASTM D 1876) peel strength
- 0.05 (ASTM E 96) water vapor permeance
- >212_ F flash point
- ~70% solids by volume
- 8.1-8.3 lbs weight per gallon.
