Call us at 855.877.3630

EMECOLE JAKE 300 DISPENSING GUN

Be the first to review this product

Availability: In stock

 

Details

  • Spring loaded high performance trigger provides a consistent flow of material at 20-40psi and less hand fatigue compared to conventional guns.
  • Built with heavy duty materials for years of use.
  • Interchangeable plungers allow the Emecole Jake 300 to be used with any combination of 300cc, 150cc and 75cc tube sets.

The Emecole line of two-component epoxies and polyurethane foams for low-pressure crack injection are packaged in dual cartridge size combinations of 300/300 (1:1) or 300/150 (2:1). The Emecole "Jake" 300 Gun is equipped to dispense both cartridge combinations for the repair of poured foundation cracks.

The Emecole "Jake" 300 introduces maximum manual power coupled with continuous flow for the dispensing of single and dual cartridge systems. The "Jake" compares favorably with air-powered counterparts in performance (plus being lighter, easier to handle, and less costly). 

The Emecole "Jake" 300 utilizes a high performance trigger mechanism which actuates a compression spring. Together, they extend the force which results in the continuous flow of material from the cartridges(s) through the static mixer. This continuous flow overcomes mixing problems which may otherwise occur in systems using static mixers. These problems typically arise from the pulsating flow resulting from the use of conventional trigger mechanisms as the sole source of power. The force generated by the spring mechanism can also be adjusted to best shift the flow and power requirements of specific application simply by changing spring tensions.

The drive rod and push rods in the Emecole "Jake" 300 are in-line. This optimizes the power generated by the trigger mechanism and eliminates twisting of the system, associated with push rods being not in-line with the drive rod. The Emecole "Jake" 300 can be adapted to any ratio and cartridge size associated with cartridges offered by Plas-Pak (Ratio-Pak and System II). This is accomplished simply by changing plungers. No adjustment of rod re-positioning is needed, making all repair jobs more efficient for basement waterproofing and concrete crack repair professionals. 

With the appropriate plunger combinations, the Emecole "Jake" 300 will also accommodate cartridge combinations of 300/75, 150/150 and 150/75.  The additional plungers are conveniently stored right under the bottom side near the handle.The Emecole "Jake" 300 spring assisted versions are also available to dispense one component cartridges (or single cartridge systems such as Sem-Kits or Tech-Kits). Designing the Emecole "Jake" 300 for other styles than "RatioPak" or "System II" are possible.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Write Your Own Review

You're reviewing: EMECOLE JAKE 300 DISPENSING GUN

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Rating