Prosoco R-Guard Porous Prep secures the loose, trimmed edges of siliceous side of a building, sheets exposed by glass and at entry points with harsh entry points
Prosoco R-Guard Porous Prep ensures use of Joint & Seam Filler or FastFlash� to dry cut edges of gypsum wall board is fast and efficient. It offers glue-like viscosity for smooth and easy use while reducing the potential for spills and rundown.
The encased edge serves as an excellent outer layer for the placement of Guard Joint & Seam Filler or Guard FastFlash. Porous Prep brushes on cheaply and inexpensively, and its glue-like viscosity diminishes general overview and overflow possibilities. When implemented on nonporous surfaces, PorousPrep typically tends to dry in 30 to 60 minutes. R-Guard PorousPrep can be used as part of a continuous, construction wind insulation material or to supplement traditional water - resistant or air barrier constituents.
- Water cleanup
- No solvent odor
- Treated surfaces �breathe _ does not trap moisture
- FORM - Light blue viscous liquid, mild odor
- SPECIFIC GRAVITY - 1.02
- pH - 9.0
- WT/GAL - 8.49 lbs
- ACTIVE CONTENT - 16%
- TOTAL SOLIDS - 16% ASTM D 2369
- FLASH POINT - >212� F (>100� C) ASTM D 3278
- FREEZE POINT - 32� F (0� C)
- SHELF LIFE - 2 years in tightly sealed, unopened container.
