Polyflow 15P sheet molded drainage is made of a geo-composite consisting of a generated impervious polymer core coated solely on a single surface with a polymer filter medium and a PET film protective layer
Below-grade relief of hydrostatic pressure over foundation, planter, and retaining walls, when connected to a passive gravity drain or operational sump Use with Totalflow� and Totalflow accessory outlets; a high-capacity collector and outlet drainage system. Use with perforated pipe outlet drainage systems Construction of French, interceptor, and earthen dam drains For Polyflow Sheet Molded Drainage construction of a protection course for post-applied sheet and fluid-applied waterproofing membranes.
The fabric allows water to infiltrate into the drain core while preventing dirt particles from moving into the core and clogging it. The core permits liquid to move to specific drainage outlets. Polyflow 15/15P Sheet Molding Drainage is designed for vertical use and can be used as protective layers for Polyguard waterproofing membranes, although it cannot be utilized for prolonged UV exposure. Below-grade hydrostatic pressure alleviation over the foundation, planter, and retaining walls when linked to a passively gravitational drain or operational sump.
- Flow Capacity D 4716: 21 g/min/ft, 21 g/min/ft
- Roll Length: 50 ft., 50 ft.
- Roll Width: 4 ft, 4 ft
- Roll Weight: 39 lbs., 40.5 lbs.
- Material: Polymeric
- Thickness D 1777: 0.40-inch, 0.40 inch
- Compressive Strength D 1621 Modified: 15,000 lbs./ft2.
