CETCO LDC 60

Be the first to review this product

Availability: Out of stock

 

Details

Cetco LDC 60 Product Data Sheet 

 

LDC 60 is produced in two grades: 

LDC 60H: A le

s viscous product designed for horizontal applications where it self-levels to produce the required minimum 60 mil (1.5 mm) thickness. 

LDC 60V: Has a thicker viscosity for vertical wall applications. Typically LDC 60V is installed in at least two passes to provide the required 60 mil (1.5 mm) thickness on vertical surfaces.

LDC 60 fluid applied membrane is ideal for:
Waterproofing concrete, masonry block, and wood surfaces. It can be applied to foundation walls, planters, utility vaults, and earth sheltered structures. Also it can be used to waterproof split-slab construction, both above and below-grade, such as plaza decks, balconies, and parking decks. Interior uses may include mechanical rooms, laboratories, kitchens, and bathrooms. LDC 60 membranes are typically not recommended for under slab applications and can not be used for property line applications.

LDC 60 is typically applied by roller or squeegee. The product requires a few minutes of mixing before being cold-applied to a properly prepared substrate. Concrete surfaces must be cured properly and dried a minimum of 7 days for normal structural concrete and 14 days for lightweight structural concrete or non-vented pan decks. LDC 60 membranes require a protection board for all applications and should only be installed when ambient temperatures are above 40°F (4°C).

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Write Your Own Review

You're reviewing: CETCO LDC 60

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Rating